Diamond Sharpening Burrs

$6.00

We feel that the best way to cut through clay is with a blade. That is why we sharpen the edges of our carving and trimming tools: Do•All, Dragtool or the Petal Knives. With general use of the sharpened edge cutting straight through the clay, the particles in the clay should help keep the blade sharp. If you drag your blade across the clay you might find your tool has lost it’s initial bite.

These Diamond Sharpening Burrs are just the thing to refresh and old blade. Use this burr bit with a Dremel, flex shaft or drill that will hold the 1/8″ shaft.  The burrs have a fine coating of diamond dust, so they cut quickly and smoothly. One light pass over the sharpened side should be enough to resharpen most blades. On our tools look for a slight bevel on the sharpened edge. This is the sharpened side and should be the side you use the Diamond Burr on.

We like to use the 5/32 on our Dragtool and the 7/32 on the Do•All and Petal Knives.

Clear
SKU: N/A Categories: ,

Description

The Diamond Sharpening Burr is to be used with a Dremel, flex shaft or drill.

The shaft of the Diamond Burr bit is 1/8″ .

 

Download the PMI Sharpening Guide by Michael Sherrill

PMI Sharpening GuidePMI Sharpening Guide 2

Additional information

Weight .02 lbs
Dimensions 2.2 × 0.5625 × 0.5625 in
Burr Diameter

5/32", 7/32"

You may also like…

January 2019
S M T W T F S
« Sep    
 12345
6789101112
13141516171819
20212223242526
2728293031